Showing posts with label watch. Show all posts
Showing posts with label watch. Show all posts

Monday, March 16, 2015

Water Resistant, What does it mean?



The Definition of Water Resistance

My new watch says it is water resistant, but what exactly does that mean? And how do I care for a water resistant watch?
A watch marked as water resistant without a depth indication is designed to withstand accidental splashes of water only. You should not submerge such a watch in water at any time. Increasingly higher acceptable depths, normally indicated in meters, usually indicate higher levels of water resistance.
There are a variety of different ways to make a watch water resistant. All such watches use "O" rings or rubber gaskets to seal the back of the case. A watch with a back that screws onto the case provides a higher degree of water tightness. Some crowns (the "winding stem") actually screw into the case, which increases water resistance even more.
General Guideline for WR levels:
  • Water Resistant: Will resist moisture from accidental splashing, rain, sweat, etc.
  • Water Resistant 30M: Will resist moisture and can be submerged, no swimming
  • Water Resistant 50M: Will resist moisture and can also be worn while swimming in shallow water.
  • Water Resistant 100M: Watch may be worn during snorkeling, skin-diving, and swimming.
  • Water Resistant 200M: (plus): Watch may be worn during standard scuba diving.
  • Water Resistant 1000M: Watch may be worn for deep sea diving.
Watch manufacturers use other terms to measure water resistance:
  • A.T.M. (atmosphere), where 1 A.T.M. equals 10 meters.
  • Bar, where 1 bar equals 10 meters.
 ***** actually i just copied above details from some website.unfortunately i forget the URL.

Sunday, February 22, 2015

Linux run a command repeatedly



There is a simple thing to run a command repeatedly in the linux environment.
You can use “watch” command to do that,

>watch –n <time between repeats> <command>

Below you can see an example,

>watch –n 1 date

Using above command you can see your system time that change every seconds.
For more information please check below thread in askubuntu.